Model 192A Hand Pump with Cylinder
This large-capacity pump is designed for cisterns or wells up to 100 feet deep, lower the all brass cylinder to water level or past 15 feet of the water with tail pipe. Very serviceable, well-constructed and easily operated that can also be hooked to a windmill.
- Windmill or Hand Pump
- Anti-Freezing
- Cast Iron or Brass Cylinder
- Stainless Rods and Couplers
COMPATIBLE - Can be ran in the same well casing as Electric Pump
WINDMILL PUMP - Can work and connect to a windmill
SIMPLE & SERVICEABLE - Easily operated and heavy cast iron construction
ANTI-FREEZING - The force cylinder is located four feet down inside the well casing and is drained at that point. This is below the frost line and eliminates risk of freezing.
ADJUSTABLE - Available to mount to existing platform 4", well cap, 6" well cap or 6" 1 1/2" offset base
SUBMERSIBLE CYLINDER PUMP COMBATIBLE - Designed to work with submersed cylinder
HEAVY DUTY - Years of operation
Proudly made in the USA.
Necessary Parts for Operation
- Part NamePart Number
- 1 1/4” Force Cup LeatherEQ150
- 1 1/8” Force Cup LeatherEQ130
- 1 11/16” Force Cup LeatherEQ100
- 1 3/8” Force Cup LeatherEQ138
- 1 7/8” & 1/2” Force Cup LeatherQ126
- 1 7/8” Force Cup LeatherEQ125
- 3 1/2” Lower Valve Leather CylinderLV300
- 3 1/4” Lower Valve Leather CylinderLV275
- 3” Lower Valve Leather CylinderLV250
- 1 1/2” & 5/8” LeatherCL158
- 1 1/2” LeatherCL150
- 1 5/8” & 5/8” LeatherCL200
- 2” & 1 5/16” LeatherCL225
- 2 1/4” & 1 1/2” LeathersCL250
- 2 1/2” & 1 5/8” LeathersCL275
- 3 1/2” & 2 1/2” LeathersCL350
- 3” & 2” LeathersCL300
- 1 13/16 x 10” Complete Cylinder450 Brass Eureka
- 2 1/2 ” x 10” Complete Cylinder442 Brass 3
- 2 1/4” x 10 Complete Cylinder442 Brass 2
- 2” x 10” Complete Cylinder442 Brass 1
- 3” x 10” Complete Cylinder442 Brass 4
Pipe - Rod - Couplings - Valves
- Part NamePart Number
- 1/2” x 1/2” Rod Coupling1/2x1/2
- 3/8” x 1/2” Rod Coupling3/8x1/2
- 3/8” x 3/8” Rod Coupling3/8x3/8
- 3/8” x 5/8” Rod Coupling3/8x58
- 3/8” x 7/16” Rod Coupling3/8x7/16
- 5/8” x 7/16” Rod Coupling5/8x7/16
- 7/16” x 1/2” Rod Coupling7/16x1/2
- 7/16” x 7/16” Rod Coupling7/16x7/16
- 1 1/2” Galv. PVC Pipe Couplings1 1/2"
- 1 1/4” Galv. PVC Pipe Couplings1 1/4"
- 1 1/4 x 6 Foot PVC Pipe Schedule 801 1/4"
- 1/2” Galv. PVC Pipe Couplings1/2"
- 1” Galv. PVC Pipe Couplings1"
- 1 1/4” Foot Valve11/4"
- Universal Check Valve15
- 3/8” Threaded Pump Rods3/8
- 1/2” Threaded Pump Rod1/2
- 7/16” Threaded Pump Rod7/16
Replacement Parts
- Part NamePart Number
- 190 SpoutK-3
- Windmill Head54
- 1 1/4” Galvanized Pump Body 1 1/4” x 54”K-11
- Brass Cylinder 2 1/2 x 10K-12
- Flat Upper Pump Rod 3/8” x 1 x 35”W-7
- Pump Rod 7/16” x 49” Stainless SteelW-8
- Base, CompleteOK
- 4 x 1 1/4 Well CapK-14A
- 7/16” x 3/8” Rod Coupling Stainless SteelK-15
- 3/8” x 1 1/2” Bolt & NutK-16
- 7/16” x 2” Clevis PinA-20A
- 192 HandleOOE
- 192 Handle Bearer125
- 192 ClampK-2
- 6 x 1 1/4 Well Cap (192)A-14
- 4"x 1 1/4” Well Cap4114
- 5 to 6 adapter Well Cap56
- 6” 1 1/2” offset Well Cap61120
- 6” x 1 1/2” Well Cap6112
- 6” x 1 1/4 offset Well Cap61140
- 6” x 1 1/4” Well Cap6114
Leathers
- Part NamePart Number
- 1 1/4” Force Cup LeatherEQ150
- 1 1/8” Force Cup LeatherEQ130
- 1 11/16” Force Cup LeatherEQ100
- 1 3/8” Force Cup LeatherEQ138
- 1 7/8” & 1/2” Force Cup LeatherQ126
- 1 7/8” Force Cup LeatherEQ125
- 3 1/2” Lower Valve Leather CylinderLV300
- 3 1/4” Lower Valve Leather CylinderLV275
- 3” Lower Valve Leather CylinderLV250
- 1 1/2” & 5/8” LeatherCL158
- 1 1/2” LeatherCL150
- 1 5/8” & 5/8” LeatherCL200
- 2” & 1 5/16” LeatherCL225
- 2 1/4” & 1 1/2” LeathersCL250
- 2 1/2” & 1 5/8” LeathersCL275
- 3 1/2” & 2 1/2” LeathersCL350
- 3” & 2” LeathersCL300
- Install Instructions Download
Yes, but it depends on the well casing diameter (5” minimum) and the amount of room between the pitless adaptor and the inner well casing.
You can, but it depends on the model of pump. We have several models (including models 50L and PHB Pitcher Pump) that can be used to force water to fill a storage tank. This can be done through either a garden hose or hard piped.
With our pitcher pumps, water can be pulled from around 25ft.
With our windmill pump and deep well pumps you can pull from up to 250ft.
Static water level is the distance between the ground and the water level in the well casing. Example: The well may be drilled 150feet deep but the water comes up within 75ft of the ground in the casing. The static water level would be 75ft.
Yes, several of our pumps have windmill adaptors (including models 50L and 192A).